AMr2/1520 EN AW-5052 AlMg2.5 2L55 A-G2.5C Allloy A5052 HR hot
rolling Aluminium coil for cans end fuel tank curtain wall.
Alloy: AlMg2.5 AMr2/1520 EN AW-5052/AlMg2.5 AlMg2.5/3.3523 2L55
5052(A-G2.5C) 5052/A95052 Allloy A5052 Aluminium HR hot rolling
Temper: F or O,H112,
Thickness: 0.01~ 14mm,
Inner diameter: 610mm,505mm,
Max Outer diameter: 2560mm,
Max weight per coil: 28 ton,
5052 aluminum plate for AL - Mg alloy aluminum plate, is one of the
most widely used antirust aluminium, the alloy of high strength,
especially the fatigue strength, plasticity and high corrosion
resistance, can not heat treatment to strengthen, in a cold work
hardening plasticity is good, when the cold work hardening
plasticity is low, good corrosion resistance, good weldability,
cutting performance is bad, can be polished.
Stock material for cans end,fuel tank ( pipeline ) of
airplane,shell of mechanical ( electrical ) and curtain wall.
5052 aluminum plate use is mainly used in the request high
plasticity and good weldability, working in a liquid or gas medium
low load parts, such as tank, gas or oil duct, and other various
liquid containers made of deep drawing small load parts: wire used
for rivet. Also commonly used to transport vehicles, ships, sheet
metal parts, instrument, lamps stent and rivet, metal products,
electrical enclosure, etc.
5052 alloy aluminium coil Chemical Composition.
Surface quality of the editors:
1, The surface are not allowed to have a crack, corrosion spots and
2, Is allowed on the surface depth is less than 8% of the nominal
size peeling defect part wall thickness, air bubbles, surface
coarse and local mechanical damage, but the defect depth is not
more than 0.5 mm, defect sheet with a total area of no more than 5%
of the total area.
3, allow the supplier along the longitudinal profiles polishing to
the surface is smooth.
4, other requirements: you have the demand side and the supplier.
Q1. What’s the maximum diameter ?
Q2. Is it possible be zinc free copper foil?
Yes ,it is possible.
Q3. Is it the Fumigation carton pallet?
Yes ,it is .
Q4. How long time get the sample
Is 7 days
Q5. How to contact you?
Q6: Can we accept customize?
Yes,we can.We can manufacture as customer's requirement.You can
send the CAD or drawing to us.