Allloy 3003 AlMn1Cu A3003 31000 AMu/1400 EN AW-3003/AlMn1Cu
AlMnCu/3.0517 3003(A-M1) ~3103(N3) 3003/A93003 HR Aluminium hot
Stock material for foil of capacitors, pressing containers,shell
for mobile phone battery,and curtain wall etc.
Purpose is mainly used for high plasticity and good weldability,
working in a liquid or gas medium low load parts, such as tank, gas
or oil duct, and other various liquid containers made of deep
drawing parts: small load wire used for rivet 3003 aluminum sheet
formability, dissolves, good corrosion resistance. Used for
processing need good formability, high solderability good
resistance to corrosion of parts, components, or both require these
performance and needs to have more than 1 XXX alloy high strength
work, such as kitchen utensils and appliances, food and chemical
products processing and storage device, transport liquid product
tank, tank, with sheet processing all kinds of pressure vessel and
pipeline generally implements, radiator, makeup, copy machine
roller, ship material.
Aluminum content: 99.90%.
Alloy: 3003 AlMn1Cu A3003 31000 AMu/1400 EN AW-3003/AlMn1Cu
AlMnCu/3.0517 3003(A-M1) ~3103(N3) 3003/A93003,
Temper: F H or O,
Thickness: 0.015~ 15mm,
Inner diameter: 610mm,505mm,
Max Outer diameter: 2560mm,
Max weight per coil: 28 ton,
Corresponding brand standard.
GB: 3003 GB/T 3190-1996.
ISO: AlMn1Cu ISO - 1989-209.1.
Japanese standard, JIS H4100 A3003 JIS H4000-1999-1999.
Non-standard: 31000 IS 736-31000.
Mark: Russia FOCT4785 AMu / 1400-1400.
EN: EN AW - 3003 / AlMn1Cu EN 573-3-19 94.
German standard: AlMnCu / 3.0517 DIM1725-1-1986.
Method: 3003 (A - M1) NFA50 NFA50-411-411.
British standard: 3103 (N3) BS 1470-1470.
American standard: 3003 / A93003 AA/UNS.
3003 for AL - Mn alloy, is one of the most widely used antirust
aluminum, this kind of the strength of the alloy is not high,
slightly higher than that of industrial pure aluminum), can't heat
treatment to strengthen, the cold working method is adopted to
improve its mechanical properties: in annealing state has high
plasticity, in a cold work hardening plasticity is good, when the
cold work hardening plasticity is low, good corrosion resistance,
good weldability, cutting performance is bad.
The corrosion resistance of 3003 aluminum alloy corrosion
resistance: very good, close to the corrosion resistance of pure
aluminum industry, the atmosphere, fresh water, sea water, food,
organic acid, and gasoline and neutral inorganic salt aqueous
solution has good corrosion resistance, corrosion resistance in the
dilute acid is also very good.
In the state of cold deformation, 3003 aluminum alloy has a
tendency to spalling corrosion, the greater the deformation, the
more serious the peeling off. Due to the uneven color after anodic
oxidation, so don't usually conduct anodized.
Chemical Composition ( Allloy 3003 AlMn1Cu A3003 31000 AMu/1400 EN AW-3003/AlMn1Cu
AlMnCu/3.0517 3003(A-M1) ~3103(N3) 3003/A93003 ).
The surface treatment of aluminum alloy.
According to surface treatment methods of aluminum sheets can be
divided into the paint and paint products two kinds big.
1) The paint products.
(1) Can be divided into the hammer aluminum plate (random
patterns), embossing plate (regular patterns) and passivation
alumina surface processing board.
(2) Such products on the sheet surface do not paint processing, to
the appearance of the surface requirement is not high, the price is
2) Paint products.
According to the coating process can be divided into: spraying
plate products and advance roller plate;
According to the paint types can be divided into: polyester,
polyurethane, polyamide, modified silicone, epoxy resin, fluorine
(2) a variety of coating, the main performance difference is the
sunlight ultraviolet resistance, of which the most commonly used on
the front (PVDF) coating for fluorocarbon lacquer, the uv
resistance ability strong; Can choose polyester or epoxy coating on
the back as a protective lacquer. Additional positive still can put
a layer of protective film can be torn off.
Q1. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q2. Is it possible be zinc free copper foil?
A: Yes ,it is possible.
Q3. Can you provide COA?
A: Yes , we can.
Q4. How to contact you?
A: Welcome to call us Or Send us a email, your email will be
guaranteed reply within 24 hours.
Q5: How do you quote price ,per ton ,per meter or kg?
A: We provide more than two pricing modes